حقيبة التسوق فارغة، إبدأ التسوق
All Products
Liquid crystal display : For status monitoring and set-up Load output : Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output : This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm : Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs : Maximum current (both outputs combined): 2A Battery Voltage 12/24 V with automatic system voltage detection Rated charge current 30A Automatic load disconnect Yes Maximum solar voltage 28V / 55V (1) Self-consumption < 10 mA Load output Manual control + low voltage disconnect +timer Protection : Battery reverse polarity (fuse) , Output short circuit, Over temperature Overload protection : Shut down after 60 s in case of 130% load Shut down after 5 s in case of 160% load Short circuit: immediate shut down Grounding : Common positive Operating temp. range -35 to +60°C (full load) Protection class IP20 Terminal size 16mm² / AWG6 Weight 0,3kg Dimensions (h x w x d) 101x184x47mm
AED0.00
يرجى ادخال بريدك الإلكتروني المرتبط بالحساب وسيتم ارسال رابط لإعادة ضبط كلمة المرور.
