حقيبة التسوق فارغة، إبدأ التسوق
All Products
Ultra - fast Maximum Power Point Tracking (MPPT)\ - Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result i s often that the battery will continually be cycled between a partially charged state and the end of discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Batter Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programming, real-time data and history display options Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots. ColorControl panel
AED0.00
Features: Ultra - fast Maximum Power Point Tracking (MPPT)\ - Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result i s often that the battery will continually be cycled between a partially charged state and the end of discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Batter Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programming, real-time data and history display options Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots. ColorControl panel
Ultra-fast maximum power Point tracking (mppt) Advanced maximum power Point detection in case of partial shading conditions Battery life: intelligent Battery Management by load shedding Bluetooth enabled (Bluetooth dongle needed) Day/night timing and light dimming Option
Ultra-fast maximum power Point tracking (mppt) Advanced maximum power Point detection in case of partial shading conditions Battery life: intelligent Battery Management by load shedding Bluetooth enabled (Bluetooth dongle needed) Day/night timing and light dimming Option.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvestby up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Battery voltage 12 / 24 / 48V Auto Select (software tool needed to select 36V) Rated charge current 85A Maximum PV power, 12V 1200W Maximum PV power, 24V 2400W Maximum PV power, 48V 4900W Max. PV short circuit current 70A (max 30A per MC4 conn.) Maximum PV open circuit voltage : 250V absolute maximum coldest conditions Maximum efficiency 99% Self-consumption Less than 35mA @ 12V / 20mA @ 48V Charge voltage 'absorption' Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth) PV terminals : Three pairs of MC4 connectors (MC4 models) Battery terminals 35 mm² / AWG2 Protection category IP43 (electronic components), IP22 (connection area) Weight 4,5kg Dimensions (h x w x d) in mm 246 x 295 x 103
Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvestby up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Operating temperature -30 to +60°C (full rated output up to 40°C) Humidity 95%, non-condensing Maximum altitude 5000m (full rated output up to 2000m) Environmental condition Indoor, unconditioned Pollution degree PD3 Data communication VE.Can, VE.Direct and Bluetooth Battery voltage 12 / 24 / 48V Auto Select (software tool needed to select 36V) Rated charge current 100A Maximum PV power, 12V 1450W Maximum PV power, 24V 2900W Maximum PV power, 48V 5800W Max. PV short circuit current 70A Maximum PV open circuit voltage : 250V absolute maximum coldest conditions Maximum efficiency 99% Self-consumption Less than 35mA @ 12V / 20mA @ 48V Charge voltage 'absorption' Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth) PV terminals 3) 35 mm² / AWG2 (Tr models) Battery terminals 35 mm² / AWG2 Protection category IP43 (electronic components), IP22 (connection area) Weight 4,5kg Dimensions (h x w x d) in mm 216 x 295 x 103
Ultra-fast Maximum Power Point Tracking (MPPT) Solar Charge Controller The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV input and either 100A, or 200A output. It is used in on-grid and off-grid solar applications where maximum battery charging power is required. Multiple independent MPPT tracking inputs With multiple MPPT trackers, you can optimize your solar panel design for maximum performance for your specific location. Isolated PV connections for additional safety Full galvanic isolation between PV and battery connections provide additional overall system safety. Wide MPPT voltage range 80 – 450 VDC PV operating range, with a 120VDC PV startup voltage. Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful charger weighs only 7.9 kg for the 100A model. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Display and Bluetooth The display reads battery, and solar charge controller parameters. The parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect. PV Isolation resistance monitoring for peace of mind at higher voltages The MPPT RS continuously monitors the PV array and can detect if there are faults that reduce the isolation of the panels to unsafe levels. VE.Can and VE.Direct port For connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Can allows for up to 25 units to be connected together in parallel and synchronize their charging. I/O Connections Programmable Relay, temperature sensor, auxiliary, digital input and voltage sensor connections. The remote input can accept the Victron smallBMS, and other BMS with allow-to-charge signal.
يرجى ادخال بريدك الإلكتروني المرتبط بالحساب وسيتم ارسال رابط لإعادة ضبط كلمة المرور.
