حقيبة التسوق فارغة، إبدأ التسوق
All Products
The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse, the built in battery monitor accurately monitors the state of charge on your battery. Use the Color Control GX for reading out the information. Part of the modular Lynx distribution system.
AED1200.00
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. Differences compared to BMV712 Battery Monitor - No programmable visual and audible alarm. - No programmable relay. SmartShunt 500A Supply voltage range 6,5 - 70 VDC Current draw < 1mA Input voltage range, auxiliary battery 6,5 - 70 VDC Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50°C (-40 - 120°F) Measures voltage of second battery, or temperature, or midpoint : Yes Temperature measurement range -20 +50°C VE.Direct communication port : Yes RESOLUTION & ACCURACY Current ± 0,01A Voltage ± 0,01V Amp hours ± 0,1 Ah State of charge (0 – 100%) ± 0,1% Time to go ± 1 min Temperature (if optional temperature sensor connected) ± 1°C/°F (0 - 50°C or 30 - 120°F) Accuracy of current measurement ± 0,4% Offset : Less than 20 / 40 / 80 mA Accuracy of voltage measurement ± 0,3% INSTALLATION & DIMENSIONS Dimensions (h x w x d) 500A: 46 x 120 x 54 mm Protection category IP21 STANDARDS Safety EN 60335-1 Emission / Immunity EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3 Automotive EN 50498
AED0.00
The Victron Smart Battery Sense is a wireless battery voltage and temperature sensor designed for Victron MPPT solar charge controllers. Using Bluetooth-based VE.Smart Networking, it delivers accurate battery measurements directly to connected chargers, optimizing charging performance, improving efficiency, and extending battery life. Its simple, wire-free installation makes it ideal for marine, RV, off-grid, and energy storage applications.
The Victron Temperature Sensor for BMV-702 and BMV-712 Smart provides accurate battery temperature monitoring to optimize charging performance and improve battery protection. Designed for compatible Victron battery monitors, it enables temperature-based charging adjustments and configurable high/low temperature alarms, helping extend battery life in marine, RV, off-grid, and energy storage applications.
The Victron Temperature Sensor for Quattro, MultiPlus & GX Devices provides accurate temperature monitoring for compatible Victron inverter/chargers and GX communication devices. Designed to improve battery charging performance and system protection, it enables temperature-compensated charging and real-time monitoring through GX devices and the VRM Portal. Ideal for marine, RV, off-grid, and energy storage applications.
يرجى ادخال بريدك الإلكتروني المرتبط بالحساب وسيتم ارسال رابط لإعادة ضبط كلمة المرور.
